Skin deformation: The main Muscle deformer lets you set up muscle and skin deformation, but it can also be used as a standalone deformer. 皮肤变形:主要的肌肉变形工具可以让你建立肌肉和皮肤的变形,但也可以使用独立的变形器。
Plastic deformation is on the other hand, permanently set in a material and cannot be regained. 而塑性变形是材料的永久性变形,(一旦发生),不能恢复。
In order to meet the requirement of bridge deformation, the hinged joints are usually set between the ends of two beams, beam end and the abutment, or on the joints position of bridge. 为满足桥面变形的要求,通常在两梁端之间、梁端与桥台之间或桥梁的铰接位置上设置伸缩缝。
Landslide deformation dynamic modeling research based on set pair analysis 基于集对分析的滑坡变形动态建模研究
Deformation Transfer for Point Set Surface Based on Vertex Deformation Gradient 基于顶点变形梯度的点云曲面变形传输
The tests data showed that the deformation set of the silicone rubber foam materials increased with the severer condition. 结果表明,硅橡胶泡沫材料的永久变形量随着老化条件严酷程度的增加而增加。
Through the simulant bonding experiment between beam of aluminum alloy and skin of carbon fiber reinforced composite with locating rivets, the deformation form and quantity of the experimental set at high bonding temperature have been discoursed. 通过模拟方向舵带定位铆钉的铝合金梁与复合材料蒙皮之间的胶接试验,论述了复合材料与铝合金之间高温胶接后,试验件的变形形式及变形量。
Considering the feature of subgrade deformation, the off set limit and the settlement calculation depth are discussed in this paper. 并结合路基变形特点,对软土层的屈服极限、沉降计算深度等问题进行了探讨。
A model of the ship dynamic deformation inertial measurement system is set up based on Kalman filter algorithm considering the actual situation of ship dynamic deformation, and then makes some simulations for the model. 结合舰船甲板动态变形实际情况,在卡尔曼滤波算法的基础上建立了舰船甲板动态变形惯性测量系统的模型,并对该模型进行了仿真。
On the section, strong reflections in 1-4 s TWT correspond to the deformation of sedimentary layers produced by a set of normal faults, where Xinghe fault is the main boundary fault between Shulu basin and Xinghe uplift, and extends to 8 km deep. 剖面图上1&4s之间的强反射对应于由一组正断层产生的沉积层变形,其中新河断裂为束鹿盆地和新河凸起之间的边界主断裂,它伸展到8km以下深处。
To direct at the anisotropy and rheological property of layer rock masses on slope, the simulating form on rheological analysis of deformation is set up for layer rock masses, and in engineering case is given. 针对层状边坡岩体力学特性的各向异性和流变性,建立了层状岩体流变变形分析的模拟格式,并给出了工程应用实例。
When the crosslinkers were applied to PVC-S, tensile strength and elongation at break increased, simultaneously, and the deformation set decreased. The time of crosslinking possessed an effect on the mechanical properties. 应用于软聚氯乙烯(PVCS)时,断裂强度、断裂伸长率均得到提高,而永久变形量明显降低,并且交联时间的延长对力学性能影响显著。
The influence of the number and location of the rivets on the deformation of the experimental set, and the influence of the deformation on the rivets, also have been analysed and discussed. 同时对定位铆钉的位置及数量对实验件变形的影响,以及铝合金热胀变形时对定位铆钉本身的影响进行了分析讨论。
The meshing theory of real tooth surface with error and heat treating deformation is studied systematically. A set of theory and method for analyzing real tooth surface meshing is put forward to adapt to different types of gears, and it is tested and verified by experiments. 对有误差和热处理变形的真实齿面啮合理论进行了系统的研究,提出了一套适合于各种齿轮类型真实齿面啮合分析的理论及方法,通过试验得到了验证。
A mechanical model of elastic ring throttle-slice is established and the differential equation of deformation is set up. 通过环形弹性节流阀片力学模型,对节流阀片弯曲变形进行了研究。
The forecast model of dam deformation is set up on the basis of the time alignment decomposition method. 基于时间序列分解法建立大坝变形预测模型。
The mathematic model of deformation resistance of this material is set up according to regressive method, which provided basic gist for choosing technological parameter of isothermal extrusion formation. 运用回归方法得出了该材料变形抗力的数学模型,从而为等温挤压成形工艺参数的选择提供了基本依据。
This method is suitable for both static and dynamic deformation measurment and the test of hydraulic generator set. 这一测试过程和方法不仅可以进行机组承重机架静态弹性变形的测试,也可以进行动态监测。
Aiming at the dynamic deformation of engine cylinder liner, a set of testing methods for measuring the deformation of wet cylinder liner in operation are put forward. 针对内燃机气缸套的动态变形问题,提出一套对湿式缸套在工作时的变形进行测试的方法。
This paper supposed the rock deformation is small elastic deformation and set up the rock deformation equation. 假设岩石体变形为弹性小变形,建立其变形方程。
A model for gold prognosis and regional brittle-ductile shear deformation transition was set up by study of the known large-and middle-scale gold deposits. 据现有大中型金矿研究建立了区域脆-韧性变形转换带结构模式和金矿预测模式,可有效指导找矿勘探。
Then according to Mindlin's linear elastic plate theory, the rs model for analyzing spatial effect of deformation of deep mixing wall has been set up. Moreover the relevant Program has been also developed. 然后采用Mindlin线弹性厚板理论,建立了深层搅拌桩墙体受力变形空间效应分析的有限元模型,并编制了相应的计算程序。
A statistic analysis model for the deformation mechanism of rockfill is set up for present lack of the statistic analysis model of observation data of dams. 建立了符合堆石坝变形机理的统计分析模型;
Finally the computational problem of such deformation is reduced to solve a set of nonlinear algebraic equations related to the strained configuration of the radial tire. 另一方面作者也考虑了充气压力载荷的随动性,将这种载荷作用下的变形计算问题归结为一个与变形后轮胎构形有关的非线性方程组求解问题。
The cause of arch dam deformation is analyzed. And the cause set and the effect set are established. Based on the physical and mechanical principle, the mechanism of Cause-effect is studied. 分析了拱坝变形的影响因素,构建了拱坝变形的因素集和结果集,并从相关物理、力学原理出发,分析了拱坝变形和变形原因之间的因果作用机制。
According to shape information or deformation requirement, key points are set to create cubic-spline curves. The curves are moved to new positions to control the deformation of image. 根据源图像中的形状信息或变形需要来设置关键点,生成三次样条特征曲线,然后移动该特征曲线到新的位置根据变型函数实现图像的变形。
To improve the dynamic negotiation of bidding decision in the previous chapter, the network deformation based on alternative set of dynamic transit and node preprocessing with expectation consideration is designed. 在招投标决策中,采用基于动态中转备选集的网络变形、以及考虑期望值的节点预处理来改进上一章的动态协商机制。
But the similarity transformation has the excessive constraints to the deformation of point set, which are useful to the training set with closed shape, such as bone. But this method to match the shape with large differences has poor performance even errors. 但相似变换对点集的形变进行了过度约束,对形状比较接近的训练集如骨骼等比较有用,匹配差异较大的形状则性能较差甚至错误。